Mx-SENS2 4

Part No.: MP-IPET-Mx-SENS2-4
4 fast analog measurement inputs up to 100 kHz

產品介紹

Features

  • Measurement modes: SENS, mA, IEPE, individual for each input
  • 4 separate dual sensor excitations (up to ±15 V, up to ±60 mA)
  • Offset adjust functions
  • TEDS Class-2 supported
  • Measurement data output via XCP on Ethernet or CAN
  • Designed for engine compartment applications
  • Toolless module to module connection
  • Ruggedized and compact modules for harsh environments

Technical Details

Device
Maximum Input Protection Voltage (Channel) ±100 V (indefinitely), ±200 V (short-time, t < 1 ms)
Channel Sampling Rates 1/ 2/ 5/ 10/ 20/ 50/ 100/ 200/ 500 Hz
Channel Sampling Rates 1/ 2/ 5/ 10/ 20/ 50/ 100 kHz (CAN up to 2 kHz)
Aggregate Sample Rate 400 kHz
Oversampling 100 kHz
Voltage Supply 9 … 36 VDC
Supply Voltage Thresholds Switch-on 9 ±0.3 VDC / Switch-off 6 ±0.3 VDC
Power Consumption, Typical 4.2 W (all excitations off)
Working Temperature Range -40 … 105 °C (-40 … 221 °F)
Storage Temperature Range -55 … 105 °C (-67 … 221 °F)
IP-Code IP 67 (ISO 20653 - 2013)
Relative Humidity 5 ... 95 %
Dimensions W106 mm x H60 mm x D62 mm (4.17 in x 2.36 in x 2.44 in)
Weight 500 g (1.10 lb)
Configuration Interface Ethernet
Data Transfer Rate 100 Mbit Ethernet (IEEE 802.3)
Input Sockets Lemo EGG 1B 307 (7-pin) SIM-DMS compatible
Galvanic Isolation
Input ↔ Module Power Supply ±100 V (indefinitely), ±500 V (pulse voltage)
Input ↔ CAN ±100 V (indefinitely), ±500 V (pulse voltage)
Input ↔ Enclosure ±100 V (indefinitely), ±500 V (pulse voltage)
Input ↔ Input ±100 V (indefinitely), ±500 V (pulse voltage)
Input ↔ Excitation ±100 V (indefinitely), ±500 V (pulse voltage)
General Channel Properties
A/D Converter 16 bit / SAR (successive approximation register)
Special Functions Offset adjust, during measurement, multiple groups
Sensor Break Detection For sensor excitation
Channel LED Available
Flashing Mode of Channel LED During configuration - blinking
TEDS Class 2
Channel Impedance 5 MΩ
Hardware Filter (Fixed) 49 kHz cut off fequency
Hardware Filter (Fixed) Type RC 4-pole
Hardware Filter (Fixed) Accuracy 25 %
Hardware Filter (Switchable) Type Butterworth (8-pole)
Hardware Filter (Switchable) 12 kHz (optional 20 kHz) cut off frequency
Hardware Filter (Switchable) Accuracy 5 %
Software Filter Types Butterworth, Bessel, Elliptic (8-pole)
Software Filter (DSP Selectable) 50/ 66.67/ 100/ 125/ 166.67/ 250/ 500/ 666.67 Hz
Software Filter (DSP Selectable) 1.0/ 1.25/ 1.68/ 2.50/ 5.0/ 6.68/ 10/ 15/ 16.8/ 25/ 50/ 66.68/ /100 / 125/ 166.68 kHz
Software Filter (DSP Selectable) Accuracy 0.05 %
Channel Current
Measurement Range Current 0 … 20 mA, ±20 mA
Accuracy at Ambient Temperature 25 °C ±0.30 %
Internal Shunt Resistor 50 Ω
Excitation
Sensor Excitation Ranges Bipolar ±2.5/ ±5/ ±7.5/ ±8/ ±10/ ±12.5/ ±15V
Accuracy Excitation at Ambient Temperature 25 °C ±0.50 %
Accuracy Excitation at Ambient Temperature 85 °C ±0.70 %
Sensor Excitation Current 30 mA (for V output ±2.5 / ±10.0 V)
Sensor Excitation Current 40 mA (for V output ±5.0 / ±12.5 V)
Sensor Excitation Current 60 mA (for V output ±7.5 / ±15.0 V)
Channel Volt
Measurement Range SENS ±0.1/ 0.2/ 0.5/ 1/ 2/ 5/ 10/ 20/ 50/ 100 V
Accuracy at Ambient Temperature 25 °C 0.06 % of selected measurement range
Drift for Ambient Temperature -40 … 85 °C 20 ppm/K
ENOB (Effective Number Of Bits)
ENOB 3.6Vpp Sinus, Measurement Range 4Vpp, at 125 Hz Typ. 15.7 bit, without filter (full bandwidth)
ENOB 3.6Vpp Sinus, Measurement Range 4Vpp, at 125 Hz Typ. 19.1 bit, with hardware and software filter (250 Hz, Butterworth)
ENOB 3.6Vpp Sinus, Measurement Range 4Vpp, at 1 kHz Typ. 14.3 bit, without filter (full bandwidth)
ENOB 3.6Vpp Sinus, Measurement Range 4Vpp, at 1 kHz Typ. 16.8 bit, with hardware and software filter (1250 Hz, Butterworth)
THD (Total Harmonic Distortion)
THD 3.6Vpp Sinus, Measurement Range 4Vpp, at 125 Hz Typ. 95 dB, without filter (full bandwidth)
THD 3.6Vpp Sinus, Measurement Range 4Vpp, at 125 Hz Typ. 122 dB, with hardware and software filter (250 Hz, Butterworth)
THD 3.6Vpp Sinus, Measurement Range 4Vpp, at 1 kHz Typ. 87 dB, without filter (full bandwidth)
THD 3.6Vpp Sinus, Measurement Range 4Vpp, at 1 kHz Typ. 114 dB, with hardware and software filter (1250 Hz, Butterworth)
Channel IEPE
Nominal Current, Regulated 4.5 mA ±10 %
IEPE Measurement Range ±0.1/ ±0.2/ ±0.5/ ±1.0/ ±2.0/ ±5.0/ ±10 V
Off-Load Voltage 24 V
Cut-off Frequency Range (High Pass) 1 Hz / 200 Hz selectable (accuracy 20%)
Accessories
System Cable  630-524.pdf
System Cable  630-507.pdf
System Cable  630-302.pdf
System Cable  630-501.pdf
System Cable  630-522.pdf
System Cable 630-500.pdf
System Cable 630-504.pdf
System Cable 630-505.pdf
System Cable USB2ETH-XLINK.pdf
System Cable X-Link-DEF.pdf
System Cable X-Link-TERM.pdf
Input Cable 620-674.pdf
Input Cable 620-695.pdf
Input Cable 600-866.pdf
Input Cable 670-807.pdf
Input Cable 670-811.pdf