Part No.: MP-IPET-M-THERMO2-u
8-channel universal thermocouple inputs type J, K, N, R, S, T, E
Device | |||
Maximum Input Protection Voltage (Channel) | ±50 V (indefinitely), ±200 V (short-time, t < 2 ms) | ||
Channel Sampling Rates | 1/ 2/ 5/ 10/ min -- 1/ 2/ 5/ 10/ 20/ 50/ 100 Hz | ||
Aggregate Sample Rate | 800 Hz | ||
Voltage Supply | 9 … 36 VDC | ||
Supply Voltage Thresholds | Switch-on 9 ±0.3 VDC / Switch-off 6 ±0.3 VDC | ||
Power Consumption, Typical | 0.9 W | ||
Working Temperature Range | -40 … 125 °C (-40 … 257 °F) | ||
Storage Temperature Range | -55 … 150 °C (-67 … 302 °F) | ||
IP-Code | IP 67 (ISO 20653 - 2013) | ||
Relative Humidity | 5 … 95 % | ||
Dimensions | W106 mm x H30 mm x D57 mm (4.17 in x 1.18 in x 2.26 in) | ||
Weight
|
295 g (0.65 lb) | ||
Configuration Interface | CAN high speed | ||
Data Transfer Rate | Software selectable up to 1 Mbit/s (ISO 11898-2) | ||
Input Sockets | Miniature TC connector (gold plated) | ||
Galvanic Isolation | |||
Input ↔ Module Power Supply | ±100 V (indefinitely), ±500 V (pulse voltage) | ||
Input ↔ CAN | ±100 V (indefinitely), ±500 V (pulse voltage) | ||
Input ↔ Enclosure | ±100 V (indefinitely), ±500 V (pulse voltage) | ||
Input ↔ Input | ±100 V (indefinitely), ±500 V (pulse voltage) | ||
General Channel Properties | |||
A/D Converter | 24 bit (Sigma/Delta) | ||
Sensor Break Detection | Activation via software settings | ||
Channel LED | Available | ||
Flashing Mode of Channel LED | Break detection | ||
Flashing Mode of Channel LED | During configuration - blinking | ||
Channel Impedance | 4.0 MΩ | ||
Hardware Filter (Fixed) | 10 Hz, filter type RC-low-pass | ||
Channel Temperature | |||
Measurement Range Temperature | Type E (NiCr-CuNi) -60 … 900 °C (-76 … 1652 °F) | ||
Measurement Range Temperature | Type J (Fe/CuNi) -50 … 1000 °C (-58 … 1832 °F) | ||
Measurement Range Temperature | Type K (NiCr/NiAl) -60 … 1370 °C (-76 … 2498 °F) | ||
Measurement Range Temperature | Type N (NiCrSi/NiSi) -50 … 1300 °C (-58 … 2372 °F) | ||
Measurement Range Temperature | Type R (Pt13Rh/Pt) -50 … 1760 °C (-58 … 3200 °F) | ||
Measurement Range Temperature | Type S (Pt10Rh/Pt) -50 … 1760 °C (-58 … 3200 °F) | ||
Measurement Range Temperature | Type T (Cu/CuNi) -200 … 200 °C (-328 … 392 °F) | ||
Accuracy at Ambient Temperature 25 °C | ±0.025 % for full measurement range | ||
Drift for Ambient Temperature -40 … 125 °C | ±10 ppm/K | ||
Linearization of Sensor Characteristic Line | Numerical interpolated | ||
Cold Junction Compensation (CJC) | PT100 for each input | ||
Accessories | |||
System Cable | 620-561.pdf | ||
System Cable | 620-502.pdf | ||
System Cable | 620-560.pdf | ||
System Cable | 620-567.pdf | ||
System Cable | M-CAN-ABS.pdf | ||
System Cable | M-DEF-200.pdf |