products

Development Board FlexDevel

Part No.: MPSC-Development-Board-FlexDevel
The FlexDevel is a low cost solution for beginners in automotive bus systems.

產品介紹

Description


Product Information

The FlexDevel is a low cost solution for beginners in automotive bus systems. It consists of a universal micro controller development platform with FlexRay, CAN, LIN and Ethernet interfaces. C-code examples and binarys for all interfaces are included, so all the interfaces can be used without programing C-code. This is an ideal base for own C-code projects and allows a step by step introduction to get in touch with programing and understanding automotive bus systems.

 

Advantages

  • Complete solution for beginners in automotive bus systems

  • FlexRay / CAN / LIN / Ethernet interfaces on the mirco controller platform available

  • Functional C-code examples for all interfaces included

  • Development toolchain (IDE, Compiler, Debugger) included

  • C-code library for all interfaces included

  • FlexConfig Developer Demo to configure the FlexRay bus system included

Technical Details

  • Freescale PowerPC with integrated FlexRay Controller (MPC5567)
  • 2 FlexRay channels (channel A and B)
  • 2 CAN HS bus interfaces
  • 2 H-bridges for control of actuators
  • Switchable termination resistors (via DIP switches) for CAN and FlexRay
  • Wakeup/Sleep-support (wakeup possible via CAN/FlexRay, push button or permanent on)
  • 1 LIN
  • 1 RS232
  • 2 SPI
  • 100 MB Ethernet
  • 8 digital inputs, 8 digital outputs (also usable as PWM )
  • 8 analog inputs
  • 8 PWM outputs
  • 2 H-bridges for control of actuators
  • 8 individual usable LEDs
  • 2 individual usable push buttons
  • 1 slot for a LCD module

Physical Characteristics


Connectors
1 x Power Supply round DC jack 2pol.
1 x Power supply Screw block 2pol.
1 x Ethernet RJ45 8pol.
1 x RS232 Sub-D 9pol.
2 x FlexRay 2 x 5 pin 2.54mm 10pol.
2 x CAN 2 x 5 pin 2.54mm 10pol.
1 x LIN 2 x 5 pin 2.54mm 10pol.
2 x SPI 2 x 5 pin 2.54mm 10pol.
1 x Analog in 2 x 5 pin 2.54mm 10pol.
1 x Digital out 2 x 5 pin 2.54mm 10pol.
1 x Digital in 2 x 5 pin 2.54mm 10pol.
1 x PWM out 2 x 5 pin 2.54mm 10pol.
Weight approx. 150 g
Dimensions approx.
L x W x H		 177 x 110 x 20 mm3

Electrical Characteristics


Supply Voltage
  Min. Typ. Max.
Operating 9 V 12 V 16 V
Absolute Maximum - 18 _ 18 V
Supply Current in
Operating Mode		 Typ: 150mA@12V

Environmental Conditions


Environmental Conditions
Temperature Operating / Non-operating: 0 - 55 ºC
Storage: 0 - 70 ºC
Relative Humidity 0% to 90% r.H., non-condensing

FlexDevel Kit

The FlexDevel Kit is the ideal entry package for the FlexRay bus system. In addition to two versatile FlexDevel communication nodes that can be used to build up a FlexRay network, it includes all the programming software and hardware. With the FlexConfig Developer demo software, which is also included, you can use this system to build up your own FlexRay communication system without additional hardware or software.
 

Scope of Delivery

  • two FlexDevel

  • FlexRay network configuration software FlexConfig Developer (demo version)

  • USB PowerPC Nexus Multilink programming adapter, including flash software and debugger (limited to 64k)

  • two FlexRay connecting cables

  • Documentation in PDF format

Order Information FlexDevel


Product Description
FlexDevel The FlexDevel is an evaluation board for the FlexRay bus system.
FlexDevel Kit FlexDevel Kit includes the following components:

  • two Flexdevel

  • FlexRay network configuration software FlexConfig
    Developer (demo version)

  • USB PowerPC Nexus Multilink programming adapter,
    including flash software and debugger (limited to 64k)

  • two FlexRay connecting cables

  • Documentation in PDF format

返回列表