產品介紹
Features
- Easy evaluation of netRAPID technology
- Incl. Real-Time Ethernet slave firmware in limited version
- Incl. 3 pieces NRP 52-RE for prototyping
- Incl. all tools and documentation for evaluation
- One hardware for all Real-Time Ethernet systems
Product Description
netRAPID is the rapid and secure alternative to developing your own slave using a communication controller. As stamp-sized netX chip carrier, it is integrated into the customer hardware in the same way as a QFP part. It is designed for automated SMD series production as well as for rapid prototyping.
neRAPID 52-RE is optimized for minimum space requirements. Means the 32 x 32 mm compact netX carrier contains all necessary operating components, such as magnetics, SQI flash and netX multi-protocol chip. Its focus is on Real-Time Ethernet communication and the protocol stack will be executed in the internal RAM of the netX. With netRAPID 52-RE the hardware development is reduced to only adding network connector and LEDs. A simple 2-layer baseboard is sufficient.
Full functionality of netRAPID is enabled via licensed firmware, which needs to be acquired once and loaded during manufacturing process.
Technical Details
| Product | Product Name | NRPEB |
|---|---|---|
| Part Number | 7600.200 | |
| Brief Description | Evaluation board including NRP 52-RE | |
|
Power Supply and Current |
Supply voltage: 24 V DC ± 6 V Maximum current (typically): 100 mA (at 24 V) Power consumption (typical): 2.4 W |
|
|
Host Interface |
Type: Parallel dual-port memory or serial dual-port memory (SPI) Connector: 68-pin (X1) or 40-pin (X2) |
|
|
Communication Interface |
Communication standard: Ethernet Connector: 2x RJ45 |
|
|
Diagnostic Interface |
Type: USB or UART, the support of the diagnostic interface depends on the loaded firmware Connector: USB: Mini-B, UART: Pin header |
|
| Display |
LED displays:
|
|
|
Operating Elements |
Network address: Adressschalter (*1), (*10), not supported by standard firmware Push buttons: Reset push button, serial boot mode push button |
|
|
Permitted Ambient Conditions |
Ambient temperature range for operation: -20 … +70 °C, at an airflow of 0.5 m/s | |
| Device |
Dimensions (L x W x H): 100 mm x 65 mm x 12 mm Weight: approx. 45 g |
|
Ordering Information
- NRPEB 52-RE (7600.200) - netRAPID Evaluation Board - Real-Time Ethernet