
Part No.: MPADFW-Splitters-Modbus-Isolator-Repeater-Modbus
This device is an isolator and repeater for RS485 network.
This device is an isolator and repeater for RS485 network.
It is possible to isolate a RS485 branch of network or/and repeat the signal.
This product is suitable for solving various problems of a RS485 line, extensions of the line, increasing the nodes number, galvanic isolation, to get a strong protection from the sparks noise and electrostatic charges or simply to change the baud rate of the communication.
The HD67149-A1 can be used also like Modbus repeater and BACnet MS/TP repeater.
Repeater:Excellent device repeater to extend the line on RS485
Isolator:Great performance of galvanic isolation
Bridge:Also be used to change Baud rate of comunication
RS485 - Isolator - Repeater - Extende bus line

| Ports | 2xRS485; 1xRS232 | |
|---|---|---|
| RS485 Connector | Terminal Block | |
| Data Rates Serial | Up to 115200 bps | |
| Power Supply | 8...19V AC; 8...35V DC | |
| Operating Temperature | -40ºC/+85ºC (-40ºF/+185ºF) | |
| Dimensions | 120x23x107 mm(DxWxH) | |
| Weight | 200g approx | |
| Mechanical Fixing | DIN Rail montage | |
| Software | SW67149 | |

| Order Code | Description |
|---|---|
| AC34011 | Isolated Converter 100..240V AC to 12V DC stabilized - AC/DC |
| AC34012 | Isolated Converter 100..240V AC to 24V DC stabilized - AC/DC |
| AC34107 | Null Modem Cable, Fem/Fem, DSub 9 Pin, 1.8 m |
| AC34114 | Null Modem Cable, Fem/Fem, DSub 9 Pin, 5 m |