Description

The FL3X Media 1000BASE-T1 is a converter for 100/1000BASE-T1 to 100/1000BASE-T and vice versa. With the FL3X Media 1000BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes. It supports up to 1000 Mbit/s in full duplex mode on both sides.
 

Advantages

• Master and slave mode selectable via DIP-switch
• 100 Mbit/s an 1000 Mbit/s mode selectable via DIP-switch
• Automatic selection of A0 and A2 mode
• Marvell 88Q2112-A2-NYD2A000 transceiver is used for the 1000BASE-T1 conversion
• Supply voltage: 8-48V DC
• Status LEDs
• RJ45 connector for 1000BASE-T
• D-Sub 9 pin male connector for 1000BASE-T1
• IP20
• Temperature range -40°C to +70°C

Technical Details

Electrical Characteristics

• Supply voltage Operating: + 8.0 V to + 48.0 V
• Absolut maximum (non-operating): - 60.0 V to + 60.0 V
• Supply current - operating: typ: 140 mA

Environmental conditions

• Temperature Operating: - 40°C to + 70°C
• Temperature Storage: - 40°C to + 70°C
• Relative humidity 0% to 90% RH, non-condensing