FL3X Media 1000BASE-T1

Part No.: MPSC-3-01000A01-01
With the FL3X Media 1000BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes.

Product Description

Description

The FL3X Media 1000BASE-T1 is a converter for 100/1000BASE-T1 to 100/1000BASE-T and vice versa. With the FL3X Media 1000BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes. It supports up to 1000 Mbit/s in full duplex mode on both sides.
 

Advantages

  • Master and slave mode selectable via DIP-switch
  • 100 Mbit/s an 1000 Mbit/s mode selectable via DIP-switch
  • Automatic selection of A0 and A2 mode
  • Marvell 88Q2112-A2-NYD2A000 transceiver is used for the 1000BASE-T1 conversion
  • Supply voltage: 8-48V DC
  • Status LEDs
  • RJ45 connector for 1000BASE-T
  • D-Sub 9 pin male connector for 1000BASE-T1
  • IP20
  • Temperature range -40°C to +70°C

Technical Details

Electrical Characteristics

  • Supply voltage Operating: + 8.0 V to + 48.0 V
  • Absolut maximum (non-operating): - 60.0 V to + 60.0 V
  • Supply current - operating: typ: 140 mA

Physical characteristics

  • Connectors: RJ45, D-Sub 9
  • Weight approx.: 145 g
  • Dimensions approx. L x W x H: 92 x 65 x 28 mm

Environmental conditions

  • Temperature Operating: - 40°C to + 70°C
  • Temperature Storage: - 40°C to + 70°C
  • Relative humidity 0% to 90% RH, non-condensing