KNX to Ethernet/IP

Part No.: MPADFW-KNX-to-EthernetIP
This series of products allows to integrate an EtherNetIP network with a KNX net.

Product Description

EtherNetIP / KNX - Converter

This series of products allows to integrate an EtherNetIP network with a KNX net.

The HD67806 is a EtherNetIP Master / KNX Converter and it allows you to connect some EtherNetIP Slaves (for example Encoder, I/O...) with a KNX net (for example light switches, actuators...) in order to exchange the informations between the networks.

The HD67807 is a EtherNetIP / KNX Converter and it allows you to connect an EtherNetIP net (for example an Allen-Bradley PLC, a ABB robot...) with a KNX net (for example light switches, actuators...) in order to exchange the informations between the networks.


 

This converters are very easy to configure and allows you to interface an EtherNetIP system with the KNX world.
On KNX side you can connect all the common KNX devices such as temperature sensors, shutters, light switches, actuators, alarms etc.

 

HD67806-KNX-B2

Ethernet/IP Master / KNX - Converter (Ethernet Switch Inside for enter/exit connection, Housing type: B, Terminal Blocks Connectors)

 

Ports 2xEthernet
KNX Protocol KNX TP
Ethernet Protocol Ethernet/IP Master
Data Rates KNX 9600 bit/s
Data Rates Ethernet 10/100 Base-T Autosensing
KNX Connector KNX Bus connector
Ethernet Connector RJ45
Power Supply 8..24V AC; 12..35V DC
Power Supply Connector 2way 5mm terminal block
Operating Temperature -40° to +85° (-40°F to +185°F)
Dimensions 71x60x95 (DxWxH)
Weight 200g approx
Mechanical Fixing 35mm DIN Rail montage
Software SW67806

 

HD67807-KNX-B2

Ethernet/IP / KNX - Converter ( Ethernet Switch Inside for enter/exit connection, Housing type: B, Terminal Blocks Connectors )



 

Ports 1xKNX; 1xEthernet
KNX Protocol KNX TP
Ethernet Protocol Ethernet/IP slave
Data Rates KNX 9600 bit/s
Data Rates Ethernet 10/100 Base-T Autosensing
KNX Connector KNX Bus connector
Ethernet Connector
RJ45
Power Supply 8..24V AC; 12..35V DC
Power Supply Connector 2way 5mm terminal block
Operating Temperature -40° to +85° (-40°F to +185°F)
Dimensions 71x60x95 (DxWxH)
Weight 200g approx
Mechanical Fixing 35mm DIN Rail montage
Software SW67807

 

Accessories


Order Code Description
AC34011 Isolated Converter 100..240V AC to 12V DC stabilized - AC/DC
AC34012 Isolated Converter 100..240V AC to 24V DC stabilized - AC/DC
AC34-AB1TP KNX Power Supply - KNX out 640mA - in 240VAC
AC34-AG1TP KNX Power Supply - KNX out 640mA + AUX out 30VDC - in 240VAC