
Part No.: MPST-mobiLink
Mobile interface for HART, FOUNDATION fieldbus, PROFIBUS PA
Bluetooth and USB Interface for commissioning parameterization & maintenance for field devices
mobiLink is a mobile and a USB interface for HART, FOUNDATION Fieldbus and PROFIBUS PA.
The Bluetooth and battery operation enables it to be used with handheld host devices such as tablets and smartphones.
mobiLink can be used in a variety of applications since it is compatible with FDT Frame applications and other major engineering tools. Additionally, It is suited for harsh environments (approved by IECEx and EX for Zone 1).
Similar Solution:

Multi protocol operation
Host communication via Bluetooth or USB
Support of FDT Frame Applications and major Engineering Tools
Suitable for use in hazardous areas
| Supported Applications |
|
|
|---|---|---|
| User Interface |
Controls
Status LEDs
|
Power on/off button, Bluetooth pairing button
FIELDBUS (Fieldbus mode), HART (HART mode), Bluetooth (Pairing/Bluetooth active), Low battery, Power on
|
| Interfaces and Connectors | USB |
Speed: USB 2.0 Full Speed, Connector: USB Type C
Electrical: Non intrinsically safe. Do not use inside hazardous areas. 5 V, 100 mA. Um = 253 V
|
| Bluetooth | Dual Mode (BT Classic and BLE), 2.4 - 2.478 GHz, Output Power: +8 dBm (maximum) | |
| Fieldbus |
Connection: 4 mm banana type jacks (red/black), polarity has to be observed
Physical Layer: according to IEC 61158-2, Type 1: 31.25 Kbit/s, voltage mode
Nominal input current (Fieldbus):
10 mA in Bluetooth and regular USB mode
18 mA (with fieldbus voltage > 9,5V) for increased battery life time in USB mode (controlled by application)
Fieldbus Terminator: No built-in fieldbus terminator
|
|
| HART |
Connection: 4 mm banana type jacks (red/black)
Physical Layer: HART FSK compliant modem
|
|
| Operation in Hazardous Areas | Intrinsic Safety | EX ia IIB, Ui = 30 V or FISCO field device |
| Parameters | Isolation: 1500 VDC between USB and Fieldbus, 1500 VDC between USB and HART | |
| IECEx | Ex ib [ia Gb] IIB (HW version 1.00), IIC (HW version 1.01) T4 Gb; Ex ib [ia Da] IIIC T100°C Db | |
| ATEX | II 2G Ex ib [ia Ga] IIB (HW version 1.00), IIC (HW version 1.01) T4 Gb; II 2D Ex ib [ia Da] IIIC T100°C Db | |
| Physical Properties | Dimensions (L x W x D) | 175 mm x 74 mm x 32 mm |
| Weight | 330 g (incl. Batteries) | |
| Power Supply |
Battery: 3 * Alkaline, IEC-LR6, nominal voltage 1,5 V
For use in hazardous area: Energizer E91 or Duracell Procell MN1500.
With batteries of other types or manufacturers certification is void.
Fieldbus interface (Medium Attachment Unit) powered by fieldbus.
|
|
| Operating Temperature | -20°C .. +50°C | |
| Storage | Store batteries in a dry place at normal room temperature. | |
| Relative Humidity | < 95% rH non condensing | |
| Protection Class | IP 54 (if USB port covered with cap) | |
| Certifications | Ex | ATEX, IECEx, FM, PCEC, KC, PESO |
| EMC/Radio | CE, FCC, SRRC, ETA, MIC, KC, TRA | |
| ROHS | UAE | |
| Scope of Delivery | |
|---|---|
| Hardware | mobiLink, USB cable, fieldbus cable set with clips, 3 * Alkaline IEC-LRC6 |
| Software |
mobiLink Manager, PACTware, Communication DTM for HART, Foundation Fieldbus, PROFIBUS PA, Yokogawa Interface and FDI CommServers
(for Foundation Fieldbus and PROFIBUS PA optional license required)
|
| Documentation | User Guide |
| Order Numbers | |
| DBA-KM-020410 | mobiLink with embedded HART Master , including accessories |
| LRA-KK-021973 | linkPlus FF – License to activate Foundation Fieldbus |
| LRA-LL-021974 | linkPlus PA – License to activate PROFIBUS PA |
| Additional products and services | |
| LRA-MM-020670 | DevComDroid HART – Android application for HART device communication |
| LRA-MM-020671 | DevCom2000 HART – Windows application for HART device communication |
| LRA-KK-020673 |
DevComFF.Win – Windows application for FF device communication
|
| LRA-MM-020672 | DevCom.iOS HART – iOS application for HART device communication |
Note: