ACCON-NetLink-PRO compact

Part No.: MPST-ACCON-NetLink-PRO-compact
Protocol Converter for Data Exchange Between Different SIMATIC S7 Controllers

Product Description

Description


Protocol Converter for Data Exchange Between Different SIMATIC S7 Controllers

Compact PROFIBUS/MPI Adapter for Ethernet Connection of SIMATIC S7 Controllers

ACCON-NetLink-PRO compact enables simple and fast integration of SIMATIC S7-200/300/400 controllers into Ethernet networks. This enables programming, configuration, and SCADA applications such as STEP7, TIA Portal, WinCC or OPC Servers to access multiple automation devices robustly and cost-effectively in parallel. The adapter can be plugged directly into the MPI connector and replaces expensive Communication Processors. The looped-through programming device socket allows retroactive piggyback mounting.

For configuration purposes, ACCON-NetLink-PRO compact can be integrated as a programming device in the familiar STEP7 or TIA Portal development tools. In addition, a web interface is available for basic settings, e.g., the PROFIBUS subscriber address or the IP address. SIMATIC S7-200/300/400 controllers without Ethernet connection can also be connected to SIMATIC S7-1200/-1500 controllers with Ethernet connection via the adapter. ACCON-NetLink-PRO compact can be supplied with power directly via the SIMATIC S7 controller or via the 24VDC connection.

 


 

Overview

Integration of S7-200, S7-300 and S7-400 into 10/100 Mbit Ethernet Networks

  • Direct communication with one or several controllers in any kind of TCP network structure
  • Support of up to 16 TCP simultaneous connections
  • Use of standard TCP/IP for communication within plant or company networks and with the Internet
  • Expansion of participants using MPI or PROFIBUS via pass-through PG port
  • Interference-free integration into existing control systems
  • Power supply directly from controller or via external power supply
  • Cost-effective solution alternative

Programming Adapter Supporting all Relevant S7 Engineering Tools

  • Interface for programming controllers via Ethernet
  • Compatibility with STEP7, TIA-Portal, WinCC and WinCC flexible
  • Display and configuration of the adapter in STEP7 or TIA portal

Application Integration through RFC1006 and OPC UA

  • Connection to HMI station and PLC directly via RFC1006 Ethernet protocol
  • Support of OPC and OPC UA by using dataFEED OPC Suite for integration into higher-level systems, e.g. for production management

Technical Data

General Information Supported Controllers Siemens SIMATIC S7-200, S7-300, and S7-400
Housing, Dimensions (W x H x D) 40 x 17 x 64 mm
Weight Approx. 110 g
System Requirements No limitation (the driver for SIMATIC NETLink-S7-NET only Windows XP, 7, 8.1, 10, 2K3 R2, 2K8 R2, 2K12 R2)
Configuration Software Web configuration
PC Communication Interface Number 1
Type Ethernet 10 Base-T, Ethernet 100 Base-TX
Connection RJ45
Supported Transfer Rates to PLC 9.6 KBit/s ... 12 MBit/s with automatic detection
Supported Transfer Rates to PC 10/100 Mbps autom. detection
Supported Bus Systems PROFIBUS, MPI
Simultaneous Connections 16 TCP/IP connections
Application Number 1
Type RS485, isolated
Connection SUB-D male connector, 9-pin. with PG interface and repeater
Transmission Rate Max. 12 Mbps
Status Indicator 5 LEDs, 2 of them bicolor
Voltage Supply 24 VDC, 18–30 V DC
Current Draw Max. 200 mA with 24 VDC
Simultaneous Connections 32 MPI / PROFIBUS connections
Ambient conditions Ambient Temperature 0 °C ... +60°C
Transport & Storage Temperature -20 °C … +80 °C
Relative Air Humidity 95% RH without condensation
Pollution Degree 2
Protection rating IP20
Approvals CE
CE CE Yes
REACH Yes


Order Information


Scope of Delivery
Hardware ACCON-NetLink-PRO compact gateway
Order Numbers
161701-PRO ACCON-NetLink-PRO compact
Additional products and services
700-5596-04 AC Adapter, 24 VDC, Euro, UK, or USA
  SDEX Suite
  OPC Suite

Note:

1. Prices and specifications are subject to change without notice.
2. EOL products will not be notified separately.
3. Product images are for reference only. Actual products may vary depending on the version or specifications.
4. Product information, specifications, and availability are subject to confirmation at the time of order.