NJ 100EN-CO (M/S)

Part No.: MPHS-NJ-100EN-CO+M (+Master Licence)
MPHS-NJ-100EN-CO (Slave only)

CANopen Master/ Slave: Can be mounted at any point of the delivery chain

Product Description

Features

  • Universal Master - Slave interface in closed IP40 housing
  • Host connection via PCI Express
  • Master oder Slave on the same hardware
  • Easy slide-in mounting without tools
  • Locks and connects without additional components on the baseboard

Product Description

The universal communication module netJACK with its PCI Express interface addresses in particular the embedded market with high-performance CPUs like Intel Atom®. Alternatively, there are versions with a traditional dual-port memory and a fast serial SPI interface.

All types have the compact design of a closed IP 40 module which can be mounted without using tools. Additional costs for the device will not arise because connector and mounting rails are designed as contact areas and cut-outs on the baseboard.

netJACK can be mounted quickly and easily right before shipment - or even by the end customer.

With netJACK customers can realize the full range of communication solutions, e.g. for drives, HMI or ident systems. At the same time, additional functionalities as PLC, visualization or individual applications are possible. For customer-specific requirements, Hilscher offers a cost-optimized Design and Production Service.

Due to the Hilscher network controller netX, a 10-years delivery guarantee is granted.
 

Technical Details

Product Product Name NJ 100EN-CO
Product Part Number 1625.500
Brief Description Exchangeable Module PCI Express - CANopen
Communication Controller netX: netX 100
Integrated Memory
RAM: 8 MB SDRAM
FLASH: 4 MB serial Flash EPROM
Power Supply and Current
Supply voltage: +3.3 V ± 5 % DC
Typical/maximum current: 590 mA/620 mA
Typical power consumption: 1,95 W (at 590 mA)
System Interface Bus type: PCI-Express, One-Lane-Port
Connector type: 40 pin connector (SAMTEC FSI-120-03-G-D-AB)
Pin distance/pin width: 0.45 mm/0.55 mm
Transmission rate: 1,5 GHz
Communication Interface
Communication standard (protocol): CANopen
Interface type: ISO 11898, potential free
Connector: D-Sub, 9-pin
Diagnostic Interface
Type: USB
Connector: Signal at host interface. Available only if integrated in host system
Display
Display
  • SYS System Status, green: RUN, yellow: RDY
  • CAN Communication status, green: STA, red: ERR
Environment Ambient temperature range for operation: -20 °C … +65 °C
Device
Dimensions (L x W x H): 
  • Length: 68.2 mm / 60 mm (with / without D-Sub plug)
  • Width: 53.4 mm (at front panel) / 50.4 mm (body)
  • Height : 25.2 mm (at front panel) / 19.2 mm (body)
Weight: approx. 68 g
Housing: Closed module
Protection class: IP40
Mounting/Installation: Via milled footprint holes in the carrier board and retaining brackets. No mounting accessories required.
Mounting/pulling cycles: max. 10
Configuration Configuration software: SYCON.net
Conformity RoHS: yes
Reach: yes
  
UL Certification
UL type: cURus
UL file: E334100
Conformance with EMC Directives
CE Sign: yes
Emission: EN55011:2009; CISPR 11, class A
Immunity: according to EN 61131-2:2003
Electrostatic discharge (ESD) according to IEC/EN61000-4-2 (Air discharge method): IEC/EN 61000-4-2:2009: ± 8 kV, Criterion A
Electrostatic discharge (ESD) according to IEC/EN 61000-4-2 (Contact discharge method): IEC/EN 61000-4-2:2009: ± 4 kV, Criterion A
Fast transient interferences (Burst), according to IEC/EN 61000-4-4: IEC/EN 61000-4-4:2004+A1:2010: ± 2 kV, Criterion A
Surge voltage, according to IEC/EN 61000-4-5 (Communication and data lines): IEC/EN 61000-4-5:2006: 1 kV, Criterion A
Tests
Shock: EN60068-2-27 Ea
Vibration: EN60068-2-6 Fc

Ordering Information 

  • NJ 100EN-CO/COM (1625.500/COM) - Exchangeable Module PCI Express - CANopen Master