Part No.: MPSC-FlexISO-S-CAN
It is used for galvanic decoupling of CAN or CAN FD bus systems with a very low sighnal delay.
The CAN network is separated by high-speed optocouplers. To operate the module, a power supply of 9 - 36 V is only required on the primary side. The plug-on adapter is extremely fast with a signal delay of 75 ns and ensures the recessive state of the bus level through the integrated logic. The high reaction speed ensures baud rates according to ISO 11898, up to 1 MBit/s for standard vehicle CAN and 8 MBit/s for CAN-FD. The vehicle measurement technology, PC hardware and diagnostic devices are thus reliably protected against short circuits and other errors through the decoupling.