PCAN-Cable 1 & 2

Part No.: MPPK-PCAN-Cable-1
MPPK-PCAN-Cable-2 (120-Ohm)

These cables are needed to set up a CAN bus and are specially designed to be used in a CAN environment.

Product Description

Connection Cable for CAN and CAN FD

These cables are needed to set up a CAN bus and are specially designed to be used in a CAN environment. If two High-speed CAN hubs need a simple direct connection between them, the PCAN-Cable 2 with integrated termination can be used. The PCAN-Cable 1 is suitable for putting together a CAN bus which shall contain tap connections and separate termination (PCAN-T-Adapter and PCAN-Term products).

PCAN-Cable 1


 

The cables can also be used for CAN FD busses.

PCAN-Cable 2
 



Technical Specifications

  • 9-pin D-Sub sockets (in accordance with CiA® 303-1) at both ends
  • Length 2.0 m
  • Shield connected to GND
  • PCAN-Cable 1 without termination resistors
  • PCAN-Cable 2 with 120-Ohm termination resistors
  • Suitable for the use in CAN FD busses

Product Includes...

  • PCAN-Cable 1 or PCAN-Cable 2