Description

The latest laptops and PCs come with USB-C slots only, so the Kvaser U100-C (01340-7) has been added to Kvaser’s U100 range of robust, single-channel CAN/CAN FD to USB interfaces. This interface is based on the standard Kvaser U100 with DB-9 connector, but replaces the standard USB type “A” connector with the smaller USB-C format. As with other devices in the range, this is powered via the USB bus. 

Robust, galvanically-reinforced and signal and power isolated, the Kvaser U100 range offers enhanced electrical protection, a vibration, shock and drop-proof housing and high-quality cabling that establishes a new reference in CAN interface design.

Other variants of the U100 range pair a standard USB type “A” connector with a 9-pin D-SUB, M12 or OBD-II CAN connector. A Precision version is also available - the Kvaser U100P - with a standard USB type “A” connector to a 9-pin D-SUB.
 

Major Features

• Supports CAN FD, up to 8 Mbit/s (with correct physical layer implementation).
• Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
• Supports silent mode for analysis tools – listen to the bus without interfering.
• Reinforced Galvanic Isolation, 5000VAC rms applied for 60 seconds.
• 20 000 msg/s, timestamped with a resolution of 100 µs.
• Industrial grade temperature range, -40 to +85 °C.
• USB-C connector.
• Powered through the Type-C USB connector (a Type-A USB connector is also available).
• DB-9 connector (other connectors available).
• Supports bit rates from 10 Kbit/sec up to 1 Mbit/sec.
• Lightweight, glass fibre reinforced polyamide housing, overmolded with TPE.
• IP67 rated.
• Intuitive LED UI.
• Support for SocketCAN.
• Compatible with J1939, CANopen, NMEA 2000® and DeviceNet.
• Fully compatible with applications written for other Kvaser CAN hardware with Kvaser CANlib.

Technical Specification