Description

The PCAN-Optoadapter is a universal plug-on adapter to allow galvanic isolation of High-speed CAN bus systems. Its integrated logic means that decoupling can be installed at any point in the CAN network. The PCAN-Optoadapter can be used in CAN FD busses with data bit rates up to 2 Mbit/s and nominal bit rates up to 1 Mbit/s.
 

Technical Specifications

• Plug-on adapter for decoupling a CAN bus for PEAK CAN interfaces
• Galvanic isolation by DC/DC converters up to 500 V
• Bit rates from 5 kbit/s up to 1 Mbit/s
• High-speed CAN transceiver NXP PCA82C251
• Suitable for the use in CAN FD busses with data bit rates up to 2 Mbit/s and nominal bit rates up to 1 Mbit/s
• CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 303-1)
• LED for status indication of the supply voltage
• 120-Ohm bus termination at the female D-Sub connector
• 5-Volt power supply through pin 1 of the High-speed CAN connection. Nearly all CAN interfaces by PEAK-System can provide the required supply
• Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Pin assignment Female D-Sub Connector 

 

Pin assignment Male D-Sub Connector
 

 

Product Includes...

1. Adapter in plastic casing
2. Manual in PDF format

Note:
1. Price and Specifications are subject to change without notice.