Descripton

The CANedge is often deployed in harsh environments in e.g. mining, construction, farming or maritime deployments. In such cases we strongly recommend to install the CANedge in this IP67 enclosure to make it 100% dust/water resistant.

The IP67 enclosure is tailored to the CANedge, enabling a plug & play installation, light weight of 200G and compact form factor of 125 x 110 x 35 mm. The IP67 enclosure features an end plate with a mounting PCB for the CANedge including 2 x DB9 connectors for direct insertion and exposes 2 x SMA connectors for optionally connecting WiFi/LTE/GPS antennas.

The design lets you easily extract/insert the end plate and CANedge as 'one unit', e.g. for SD card extraction in the field.

How to install

To install your CANedge follow below steps:

• Mate the CANedge with the IP67 PCB DB9 connectors

• Mount the CANedge flanges to the PCB via the 4 x M3 screws

• Connect the 2 x SMA cables to the CANedge (if relevant)

• Verify that the device powers on and records data

• Insert the IP67 end plate + CANedge into the enclosure

• Firmly close the end plate to the enclosure (fasten both sides)

• Mount the IP67 enclosure using the M6 bolts

​Ready-to-use adapters/antennas

The IP67 enclosure provides a DTM06-12SA IP67 connector that exposes all relevant pins from the 2 x DB9 connectors of the CANedge (see the tech specs tab for the pinout).

You can create your own DTM06-12SA wiring harness using our DTM06-12SA connector kit (or your own) - or you can use our DTM06-12SA-DB9/DB9 adapter cable for plug & play installation. The latter option is convenient as it allows you to directly use all of our existing DB9 adapter cables (just as if you were connecting to the CANedge directly). However, the DB9 connectors of this adapter cable are not IP67. As such, the adapter is useful if you deploy in an area with dust, but without excessive humidity / water exposure (to avoid corrosion).

You can use any of our existing SMA antennas for the CANedge with the IP67 enclosure. For deployments of the CANedge3 in areas with high humidity or water exposure, we recommend to use our IP67 MEA-LGG-AM antenna.

Technical Specifications

GENERAL

• Package Contents: IP67 enclosure, IP67 end plate (with PCB), 4 × M3 bolts, 4 × M3 lock nuts, 2 × M6 bolts, 2 × M6 lock nuts, 4 × M6 washers, 2 × IP67 SMA adapter cables (pre-attached to the end plate), 2 × IP67 SMA plugs
• IP Rating: IP67 (dust-tight and protected against short-term immersion in water)
• Color: Black
• Material: Plastic
• Ventilation: No ventilation holes
• Weight: 200 g (including SMA cables and PCB, excluding CANedge)
• Dimensions: 110 × 125 × 35 mm (W × L × H)
• Operating Temperature: -25°C to +70°C (for CANedge)
• Mounting Flanges: 2 × M6 flanges (bolts/washers/nuts included)
• Connectors: 2 × DB9 (for mating with CANedge), 1 × IP67 DTM06-12SA (for external connections)
• Adapter Cables: Optional adapters include our DTM06-12SA-DB9/DB9 adapter or DTM06-12SA connector kit