products

OBD Development Kit

Part No.: MPOBD-OBD-Development-Kit
It is a modular development system designed to speed up the development of devices that interface with the OBD bus.

Product Description

Availability: Out of stock
 

Description

The OBD Development Kit is a modular development system designed to speed up the development of devices that interface with the OBD bus. It consists of the Interconnect Board, three removable modules (Power, OBD Drivers, and STN OBD IC), and an OBD cable.

As-shipped, the kit is a fully functioning OBD-II to USB interface that supports all OBD-II protocols and works with any ELM327-compatible software.

The Interconnect Board features UART and USB interfaces, an OBD breakout with access to all all 16 OBD port lines, three module slots with breakout headers, and a number of configuration jumpers and test points.

The unique modular design offers considerable flexibility, allowing engineers to quickly evaluate, prototype, and verify the major circuit blocks.

 

Features

  • Modular design
    • Interconnect Board
    • STN Breakout Module
    • OBD Driver Module
    • Power Module
  • ELM327-compatible command set
  • Breakout headers for all module pins
  • 16-pin OBD breakout header
  • UART and USB interfaces (FT232RL/Virtual COM Port)
  • Test points for measuring voltage
  • Tap points for measuring current
  • Configurable sleep/wakeup functionality
  • Can be powered from OBD Port, or the optional 12VDC power supply

Connection Diagram

Shown with optional ECUsim 2000 and laptop (not included). 
 

User Interface Diagram

 

Specifications

  • DEVICE WEIGHT: 5 oz (140 g)
  • DIMENSIONS: 7.4 x 4.0 x 1.0 in (187.9 x 102.6 x 26.2 mm)
  • PACKAGE CONTENTS:  
    • OBD Interconnect Development Board with 3 modules
    • Cable, J1962M to DB15 (HI-DM)
    • USB Cable, 6ft

Protocols

Support for all legislated OBD-II protocols:

  • SAE J1850 PWM (Ford)
  • SAE J1850 VPW (GM)
  • ISO 9141-2 (Asian, European, Chrysler)
  • ISO 14230-4 (Keyword Protocol 2000)
  • ISO 15765-4 (CAN 250/500 kbps, 11/29 bit)

Support for non-legislated OBD protocols:

  • ISO 11898 (raw CAN)
  • SAE J1939 (cable not supplied - does not support 24 Volts)
  • SAE J2411 Single-Wire CAN (SW-CAN) - GM proprietary network
  • Medium-Speed CAN (MS-CAN) - Ford proprietary network

Note:

1. Prices and specifications are subject to change without notice.
2. EOL products will not be notified separately.
3. Product images are for reference only. Actual products may vary depending on the version or specifications.
4. Product information, specifications, and availability are subject to confirmation at the time of order.
Back