Description

The PCAN-miniPCIe card enables the connection of embedded PCs and laptops with PCI Express Mini slots to CAN networks. There is galvanic isolation of up to 300 Volts between the computer and CAN sides. The card is available as a single or dual-channel version.

The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.

Specification

• CAN interface for the PCI Express Mini slot (uses PCIe lane)
• 1 or 2 High-speed CAN channels (ISO 11898-2)
• CAN bus connection via connection cable and D-Sub, 9-pin (in accordance with CiA® 303-1)
• Bit rates from 5 kbit/s up to 1 Mbit/s
• Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
• FPGA implementation of the CAN controller (SJA1000 compatible)
• NXP PCA82C251 CAN transceiver
• Galvanic isolation on the CAN connection up to 300 V, separate for each CAN channel
• Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Pin assignment D-Sub

2　CAN-L
3　GND
6　GND
7　CAN-H
 

Scope of Supply

• PCAN-miniPCIe card, depending on the order, in the following version:
• IPEH-003048: PCAN-miniPCIe Single Channel
• IPEH-003049: PCAN-miniPCIe Dual Channel
• Connection cable including D-Sub plug for each channel
• Device drivers for Windows® 11 (x64), 10 (x64), and Linux
• CAN monitor PCAN-View for Windows®
• Programming interface PCAN-Basic for developing applications with CAN connection
• Programming interfaces for standardized protocols from the automotive sector
• Manual in PDF format

Note: