products

PCAN-TJA1054

Part No.: MPPK-IPEH-002039
It bus converter establishes a connection between a High-speed CAN bus (ISO 11898-2) and a Low-speed CAN bus (ISO 11898-3)

※ Microport is the exclusive authorized distributor of PEAK-System in Taiwan.

Product Description

Description

The PCAN-TJA1054 bus converter establishes a connection between a High-speed CAN bus (ISO 11898-2) and a Low-speed CAN bus (ISO 11898-3). One of the most important potential applications of the bus converter is a simple connection between a PEAK CAN interface (e.g. PCAN-USB) and a Low-speed CAN bus.

 

Specifications

  • Adapter from High-speed CAN to Low-speed CAN
  • Bit rates up to 125 kbit/s
  • CAN transceiver NXP PCA82C251 and TJA1055
  • Termination resistors for Low-speed CAN can be switched (560 Ohm / 5.66 kOhm)
  • Power LED
  • Error LED (Low-speed CAN)
  • CAN bus connection via D-Sub,9-pin (in accordance with CiA® 106)
  • 5-Volt power supply through pin 1 of the High-speed CAN connection. Nearly all CAN interfaces by PEAK-System can provide the required supply
  • Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)

Pin assignment Female D-Sub Connector

1　5V Power supply
2　CAN-L
3　GND
6　GND
7　CAN-H

Pin assignment Male D-Sub Connector

2　CAN-L
3　GND
6　GND
7　CAN-H
 

Scope of Supply

  • IPEH-002039: Adapter in plastic casing
  • Manual in PDF format

Note:

1. Prices and specifications are subject to change without notice.
2. EOL products will not be notified separately.
3. Product images are for reference only. Actual products may vary depending on the version or specifications.
4. Product information, specifications, and availability are subject to confirmation at the time of order.
Back