products

PCAN-Router

Part No.: .
MPPK-IPEH-002210 (with D-Sub connectors)
MPPK-IPEH-002210-P (with Phoenix connector)
MPPK-IPEH-002211 (with D-Sub connecotrs opto-decoupled)
It is a dual-channel CAN module whose NXP LPC21 series programmable microcontroller provides the option of using the CAN messages on both channels on a flexible basis.

※ Microport is the exclusive authorized distributor of PEAK-System in Taiwan.

Product Description

Description

The PCAN-Router is a dual-channel CAN module whose NXP LPC21 series programmable microcontroller provides the option of using the CAN messages on both channels on a flexible basis. This gives a whole range of options for manipulation, evaluation, filtering, and routing of CAN messages. 

Using the programming library and the GNU compiler for C and C++, a firmware is created and then transferred to the module via CAN. At delivery, the PCAN-Router is equipped with a standard firmware that forwards CAN messages 1:1 between both channels at 500 kbit/s. The corresponding source code is included as example in the scope of supply.

The module is installed in an aluminum profile casing, and is shipped in versions with two D-Sub connectors or a screw-terminal strip.

Requirements: The transfer of the firmware via CAN requires a PEAK CAN interface.
 

Specifications

  • NXP LPC21 series microcontroller (16/32-bit ARM CPU)
  • 32 kbyte EEPROM
  • Two High-speed CAN channels (ISO 11898-2)
    • Comply with CAN specifications 2.0 A/B
    • Bit rates from 40 kbit/s up to 1 Mbit/s
  • Connections via two 9-pin D-Sub connectors or one 10-pole screw-terminal strip (Phoenix)
  • Galvanic isolation of the D-Sub connector CAN 2 (only for IPEH-002211)
  • Additional digital input (only for IPEH-002210 and IPEH-002211)
  • Status signaling with two 2-color LEDs
  • Aluminum casing, optional with DIN rail fixing option available
  • Voltage supply from 8 to 30 V
  • Extended operating temperature range from -40 to +85 °C (-40 to +185 °F)
  • New firmware can be loaded via CAN interface

Scope of Supply

  • PCAN-Router in aluminum casing, depending on the order, in the following version:
    • IPEH-002210: PCAN-Router with D-Sub connectors
    • IPEH-002210-P: PCAN-Router with Phoenix connector
    • IPEH-002211: PCAN-Router with D-Sub connectors opto-decoupled
  • IPEH-002210-P: mating connector (Phoenix Contact MC 1,5/10-ST-3,81 - 1701458)
  • Windows® development package with GCC ARM Embedded and programming examples
  • Flash program PEAK-Flash for Windows® 11 (x64/ARM64), 10 (x64) Details ...
  • Manual in PDF format

Requirements: The transfer of the firmware via CAN requires a PEAK CAN interface

Note:

1. Prices and specifications are subject to change without notice.
2. EOL products will not be notified separately.
3. Product images are for reference only. Actual products may vary depending on the version or specifications.
4. Product information, specifications, and availability are subject to confirmation at the time of order.
Back