products

PCAN-MicroMod FD Evaluation

Part No.: MPPK-IPEH-003081 (Board)
MPPK-IPEH-003082 (Kit)
It is an evaluation board for the PCAN-MicroMod FD and allows the conception and development of own circuits with CAN connection and I/O functionality.

※ Microport is the exclusive authorized distributor of PEAK-System in Taiwan.

Product Description

Description

This product is an evaluation board for the PCAN-MicroMod FD and allows the conception and development of own circuits with CAN connection and I/O functionality. It can also be used for training purposes for CAN and CAN FD setups. Via pick-offs, screw terminals, switches, and potentiometers, the user can access the resources of the attached PCAN-MicroMod FD and check configurations or test circuits.

The configuration is done with a supplied Windows software which transfers the configuration data to the module via CAN. The optionally available Evaluation Kit includes the CAN interface and a CAN cable required for this purpose.

The PCAN-MicroMod FD Evaluation Board can alternatively be operated with CANopen firmware from our partner Embedded Systems Academy. A license for the CANopen firmware is included in the scope of delivery.

Requirements: The configuration requires a PEAK CAN interface.
 

Specifications

  • Board with plugged on PCAN-MicroMod FD
  • CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 106)
  • Screw terminal connections for all I/Os
  • Switchable CAN termination of 120 Ohm
  • Pick-offs for all pins of the PCAN-MicroMod FD
  • Low-side switches for the digital outputs
  • DIP switches for status change of the digital inputs
  • Protected digital inputs
  • LEDs for digital inputs and outputs
  • 4 potentiometers for analog inputs
  • Soldering fields for individual additional wiring
  • RS-232 connection with V.24 signal levels for direct access to the microcontroller
  • 4-bit rotary coding switch for setting the module ID
  • Firmware upload via CAN, USB, or RS-232; switchable via 3 buttons
  • Reset button for restarting the board
  • Voltage supply 5 V via Micro-USB or barrel connection
  • Operating temperature range from 0 to 70 °C (32 to 158 °F)
  • Board 100 x 102 mm with rubber feet

Scope of Supply

Scope of supply PCAN-MicroMod FD Evaluation Board (IPEH-003081)

  • PCAN-MicroMod FD
  • PCAN-MicroMod FD Evaluation Board
  • USB connector cable
  • PCAN-MicroMod FD Configuration for Windows® 
  • CANopen license for one PCAN-MicroMod FD
  • Windows® development package with GCC ARM Embedded and programming examples
  • Flash program PEAK-Flash for Windows® 11 (x64/ARM64), 10 (x64) 
  • Manual and schematic in PDF format

Scope of supply PCAN-MicroMod FD Evaluation Kit (IPEH-003082)

  • Scope of supply of the PCAN-MicroMod FD Evaluation Board
  • CAN interface PCAN-USB FD
  • 2 m CAN cable with termination

Requirements: The configuration requires a PEAK CAN interface

Note:

1. Prices and specifications are subject to change without notice.
2. EOL products will not be notified separately.
3. Product images are for reference only. Actual products may vary depending on the version or specifications.
4. Product information, specifications, and availability are subject to confirmation at the time of order.
Back