Description

A versatile low-cost vehicle network interface for network development. 

If you work with multiple CAN channels in your development work, The NetbriDGe offers the lowest cost per channel on the market today!

The best value in CAN pass-thru device hardware. Use it for validation, network development, and test fixture to module network communication. Also a great tool for End-of-Line testing and using your own software for ECU and network prototypes. It is compatible with all of today’s industry standards.

The netbridge provides standards-based engineering and development vehicle applications for EOL Testing and ECU prototyping by sending/receiving messages over the data bus to communicate with a device under test, a vehicle network, or test fixture using an open-ended 25 pin DB cable–making it the perfect CAN & LIN tool for engineers who prefer to write their own software.

• 4 High-Speed CAN Channels
• 1 Single Wire CAN Channel,
• Simulated LIN Master and/or Slave nodes
• Supports LIN Bus versionsl 1.2, 1.3, “2.x”
• Realtime access on signal and frame data (read/write)
• Multi-Protocol Support - Diagnostics On CAN & J1939
• Selectable Speed of CAN Channels (Up to 1Mbps)
• Supports J2534 Diagnostics and Reflashing Applications
• Rest Bus Simulation, ECU test, Automated Test Systems, Software Development
• LED Indicators for Each CAN Channel
• Pin Assignment Label for Easy Configuration
• High-Speed USB Communication to PC
• Rugged Aluminum Housing with Protective Rubber Bumpers

Benefits

• 4 CAN Channels
• 1 SW CAN Channel and 1 LIN Channel Supported
• Up to 1 Mbps Capable
• Supports J2534 Diagnostics and Re-flashing Applications
• Rest-Bus Simulation, ECU testing
• High-Speed USB Communication
• Simulataneous Data On All Channels
• Time Stamp Recording
• JVT Software To Validate Connectivity
• J2534 DLL Included
• Compatible With Standard Software Packages
• J2534 Sample Source Code Included

Protocol Support

• J2534
• SW-CAN/ J2411
• J1939
• LIN/ J2602
• ISO 15765

Kit Includes

• DG-NBRIDGE
• DG-DPA-15U-CABLE
• DG-SAINT2-CABLE
• Software and Drivers CD
• QuickStart Guide
• Carrying Case

Specifications

• CAN Compliance: CAN 2.0A (11-bit ID), CAN 2.0B (29-bit ID), ISO11898
• Protocol Support:
  • SW CAN (SAE J2411), SAE J1939, LIN, J2602
  • Diagnostics On CAN (ISO15765)
• Device Drivers: SAE J2534-1
• HS-CAN Bitrate: 5-1000 Kbps, Auto Baud Capable
• LED Indicators: Power, PC, CAN1, CAN2, CAN3, CAN4 Traffic
• OS Compatibility: Vista, Win7 (32/64), and Win8 (32/64), Win10
• USB-PC Interface: USB 2.0
• Processor: 90 MIPS RISC Based Design
• Firmware: Field Upgradable
• Physical: 6.1” x 2.5” x 1.2”
• Operating Range: -40°C to +85°C
• Operating Voltage: 9 - 32 VDC; Industrial Systems 24 VDC Compatible
• Operating Current: 250mA Max
• Electrical Isolation: Transient & Reverse Voltage Protected
• Industry Compliance: CE, RoHs

Note: