products

PCAN-Cable 1 & 2

Part No.: MPPK-IPEK-003000 (Cable1)
MPPK-IPEK-003001 (Cable2)
Connection Cable for CAN and CAN FD

※ Microport is the exclusive authorized distributor of PEAK-System in Taiwan.

Product Description

Description

These cables are needed to set up a CAN bus and are specially designed to be used in a CAN environment. If two High-speed CAN hubs need a simple direct connection between them, the PCAN-Cable 2 with integrated termination can be used. The PCAN-Cable 1 is suitable for putting together a CAN bus which shall contain tap connections and separate termination (PCAN-T-Adapter and PCAN-Term products).

The cables can also be used for CAN FD buses.
 

 

PCAN-Cable 1

 

PCAN-Cable 2


 

Specifications

  • 9-pin D-Sub sockets (in accordance with CiA® 106) at both ends
  • Length 2.0 m
  • Shield connected to GND
  • PCAN-Cable 1 without termination resistors
  • PCAN-Cable 2 with 120-Ohm termination resistors
  • Suitable for the use in CAN FD buses

Scope of Supply

  • PCAN-Cable, depending on the order, in the following version:
    • IPEK-003000: PCAN-Cable 1
    • IPEK-003001: PCAN-Cable 2
Other lengths and special cable makeup on request.

Note:

1. Prices and specifications are subject to change without notice.
2. EOL products will not be notified separately.
3. Product images are for reference only. Actual products may vary depending on the version or specifications.
4. Product information, specifications, and availability are subject to confirmation at the time of order.
Back