products

PCAN-Cable M12

Part No.: MPPK-IPEK-003016
CAN Adapter Cable from D-Sub Socket to M12 Circular Connector

※ Microport is the exclusive authorized distributor of PEAK-System in Taiwan.

Product Description

Description

M12 circular connectors are robust and offer increased protection against environmental influences. They have thus established as a connection option to CAN buses for challenging operating conditions. 

The standard NMEA 2000® from the National Marine Electronics Association specifies a manufacturer-independent communication via CAN on boats and ships and implies the use of certain M12 connectors.

The PCAN-Cable M12 routes the CAN lines of the D-Sub socket to an M12 circular connector. Additional lines for Shield and power supply were added according to the NMEA 2000® specification. This enables access with PEAK CAN interfaces.

 

Specifications

  • 9-pin D-Sub socket to 5-pin M12 circular connector (in accordance with CiA® 106 and NMEA 2000®)
  • Length 1.0 m
  • Without termination resistor
  • Suitable for the use in CAN FD buses
  • Suitable for NMEA 2000® connection and power supply

Pin assignment D-Sub

2: CAN-L / NET-L

3: GND / NET-C

6: Shield

7: CAN-H / NET-H

9: VBAT +12 V / NET-S

 

Pin assignment M12

1: Shield

2: VBAT +12 V / NET-S

3: GND / NET-C

4: CAN-H / NET-H

5: CAN-L / NET-L
 

Scope of Supply

  • IPEK-003016: PCAN-Cable M12

Other lengths and special cable makeup on request.
 

Note:

1. Prices and specifications are subject to change without notice.
2. EOL products will not be notified separately.
3. Product images are for reference only. Actual products may vary depending on the version or specifications.
4. Product information, specifications, and availability are subject to confirmation at the time of order.
Back