Description

The SAE J1939 protocol establishes consistent CAN messages for the communication and diagnosis between components of heavy-duty vehicles such as construction machinery, tractors, and agricultural machines. In this area, robust DEUTSCH connectors are often used for on-board diagnostics connection.

The PCAN-Cables J1939 route the CAN lines of the DEUTSCH connectors to D-Sub sockets and thus allow access via PEAK CAN interfaces.
 

PCAN-Cable J1939 Type 2 DEUTSCH-connector to D-Sub

PCAN-Kabel J1939 Type 1 & 2 DEUTSCH-connector to 2x D-Sub

Specifications

• 9-pin D-Sub socket (in accordance with CiA® 106) to 9-pole DEUTSCH connector of the HD series (J1939 type 1 and 2)
• Length 1.0 m
• Without termination resistor

Pin assignment D-Sub

2: CAN-Low

3: CAN-Shield

7: CAN-High

Pin assignment DEUTSCH Type 1

C: CAN 1-High

D: CAN 1-Low

E: CAN-Shield

H: CAN 2-High (only IPEK-003014)

J: CAN 2-Low (only IPEK-003014)

Pin assignment DEUTSCH Type 2

C: CAN 1-High

D: CAN 1-Low

E: CAN-Shield

H: CAN 2-High (only IPEK-003015)

J: CAN 2-Low (only IPEK-003015)
 

Scope of Supply

• PCAN-Cable J1939, depending on the order, in the following version:
  • IPEK-003009: Type 1 DEUTSCH-connector to D-Sub
  • IPEK-003019: Type 2 DEUTSCH-connector to D-Sub
  • IPEK-003014: Type 1 DEUTSCH-connector to 2 x D-Sub
  • IPEK-003015: Type 2 DEUTSCH-connector to 2 x D-Sub

Note: