DIO-43-Modbus

Part No.: MP-DIO-43-Modbus
Act as a Modbus Slave device receiving command from Modbus Master

產品介紹

Features

  • USB + RS-485 both interface control
  • Act as a Modbus Slave device receiving command from Modbus Master
  • Support 4 DI / 3 DO 
  • Utility support for configuration

Specifications


Hardware

  • CPU: 8 bits CPU
  • RAM: 2 KB SDRAM 
  • ROM: 32 KB Flash ROM

Software Features

  • Protocol: Modbus RTU 
  • OS Supported: Win 10                           
  • Configuration: Window Utility

Serial Interface (to control DIO)

  • Port Number: 1
  • Port Type: RS-485 
  • Connector: 2-pin Terminal Block
  • Speed: 9600 bps ~ 115.2 Kbps
  • Parity: None , Odd , Even
  • Data Bit: 8
  • Stop Bit: 1 , 2
  • Protection: RS-485 Surge Protection

Digital I/O

  • Digital Input: 4 (active High / Low selectable)
  • Digital Output: 3 (active High / Low selectable)
  • DO x 3: Relay output, 125V AC@0.5A, 30V DC@1A
  • DI x 4: 3000 VDC Isolation Protect
  • Wet contact:
    • Logic level 0 : 0 ~ 2 V
    • Logic level 1 : 5 ~ 20 V
  • Dry contact
    • Logic level 0 : close to GND 
    • Logic level 1 : open

USB Interface (FTDI chipset)

  • Port number: 1
  • Port type: Com port

Power

  • Input:
    • DC 5 ~24V, 100mA@ 12VDC
    • USB bus Power: 5V@300mA 

Environment

  • Temperature : Operating:  -10°C ~ 70°C 
  • Storage: -15°C ~ 75°C 
  • Humidity :
    • Operating:  10% ~ 95% non-condensing
    • Storage:  5% ~ 95% non-condensing

Regulatory Approval

  • FCC Part15 Class A 
  • CE EN55022 Class A, EN55024
  • RoHS Compliance

Warranty  

  • 1 Year