NHST-T100-CO/COM
Part No.: MPHS-NHST-T100-CO/COM
Ethernet LAN CANopen Master: LAN controlled CANopen Master for DIN rail
產品介紹
Features
- Fully featured CANopen Master for up to 126 CANopen nodes
- Open access via TCP/IP-based access protocol
- Quick access via DLL with same API as PC fieldbus cards
- Easy integration in embedded systems via 'C'-based driver source code
- Open XML-based configuration possibility
- Access to CANopen Slave object dictionary via SDO
Product Description
A netHOST FB is a full-featured and autonomously operating Fieldbus master allowing industrial PCs and other embedded systems the control of Fieldbus networks over an ordinary LAN connection.
A simple TCP/IP based transport protocol transfers the services between the controlling unit and the device. For device integration a DLL for Windows and a ‚C‘ source code for embedded solutions is provided. In both cases the call interface (API) is identical to Hilschers PC cards. This makes a netHOST a „remotely controllable PC card for field installations“.
100 bytes process data inputs and outputs are exchangeable over the LAN network in about one millisecond. Acyclic services to the subordinate Fieldbus stations are supported as well. A bus configuration software is included in the delivery.
Two devices can be used in combination to realize redundant applications. Services are provided to execute a controlled switchover in the event one device fails or a line breaks. In case a device fails the memory card slot allows service personnel to perform a firmware and configuration recovery on a replacement device in less than a minute.
Technical Details
| Product | Product Name | NHST-T100-CO |
|---|---|---|
| Part Number | 1890.500 | |
| Brief Description | Ethernet LAN CANopen Master | |
| Communication Controller | netX: netX 100 | |
| Integrated Memory |
RAM: 8 MB SDRAM
FLASH: 4 MB serial Flash
|
|
| Memory Card | Type and size: SD card, max. 2 GByte. SDHC- or SDXC-card type must not be used. | |
| Power Supply |
Supply voltage: 24 V DC ± 6 V
Maximum Current at 24 V (typically): 130 mA
Typical power consumption: 3,2 W
Connector: Mini-COMBICON, 2-pin
Reverse voltage protection: yes
Requirement to the power supply: For UL conform usage: Device shall be supplied by an isolated voltage source
|
|
| Communication Interface 1 |
Communication standard: Ethernet
Interface type: 100BASE-TX or 10BASE-T, isolated
Connector: 2 * RJ45
|
|
| Communication Interface 2 |
Communication standard: CANopen
Interface type: ISO 11898, optically isolated
Connector: D-Sub, male, 9-pin
|
|
| Diagnostic Interface |
Type: USB
Connector: Mini-USB, 5-pin
|
|
| Displays |
LED displays
|
|
| Environment |
Ambient temperature range for operation: 0 … +60 °C
Humidity range: no condensation permitted
Pollution degree: For UL-compliant usage: Device must be used in a pollution degree 2 environment
|
|
| Device |
Dimensions (L x W x H): 100 x 52 x 70 mm (without connector)
Weight: appr. 150 g
Degree of protection: IP 20
Mounting: on DIN rail EN 60715
|
|
| Configuration |
Configuration software:
|
|
| Conformity | RoHS: Yes | |
| Conformance with EMC Directives |
CE sign: Yes
Emission: CISPR 11 Class A
Immunity: EN 61131-2:2003
|
|
Ordering Information
- NHST-T100-CO/COM (1890.500/COM) - Ethernet LAN CANopen Master