PCAN-MicroMod Mix 3

Part No.: MPPK-PCAN-MM-Mix-3
The Mix 3 motherboard allows the use of all inputs and outputs available on the PCAN-MicroMod, which opens up a wide range of potential applications in the automotive and industrial sectors.
*標高電子為德商PEAK SYSTEMS台灣唯一代理商。

產品介紹

Application-specific PCAN-MicroMod Motherboards

The motherboards for the PCAN-MicroMod provide an application-oriented environment. Typical characteristics of this product group include a wide supply voltage range and the protective circuit for the inputs and outputs. CANopen® firmware is available for all PCAN-MicroMod motherboards.

The Mix 3 motherboard allows the use of all inputs and outputs available on the PCAN-MicroMod, which opens up a wide range of potential applications in the automotive and industrial sectors.


Requirements

The configuration requires a PEAK CAN interface.


Technical Specifications

  • High-speed CAN connection (ISO 11898-2)
    • Bit rates from 10 kbit/s up to 1 Mbit/s
    • Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • Completely configurable using the Windows® software PCAN-MicroMod Configuration
  • Operating voltage 12 V DC nominal, 8 to 26 V possible
  • Status LEDs for power supply and digital output
  • Plastic casing with Tyco automotive connectors
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
  • 8 analog inputs:
    • Measuring range unipolar 0 to 4.1 V (can be expanded using by a voltage divider)
    • Resolution 10 bit, sample rate 1 kHz
    • Protection against under- and overvoltage
    • Low pass behavior
  • 8 digital inputs:
    • Schmitt trigger behavior, inverting
    • Threshold High = 4.8 V, Low = 1.2 V
    • Pull-up or pull-down circuit selectable for each input
    • Low pass behavior
  • 4 frequency inputs (differences to the digital inputs):
    • Scannable frequency range 0 to 10 kHz
  • 8 digital outputs:
    • High-side switches, 350 mA continuous current, 500 mA short-circuit current
    • 4 outputs also usable as low-side switches, 700 mA continuous current, 1 A short-circuit current
    • Short-circuit protection
  • 4 PWM/frequency outputs:
    • Low-side switches, 350 mA continuous current, 1 A short-circuit current
    • 2 outputs also usable as high-side switches, 1.5 A continuous current, 5 A short-circuit current
    • Short-circuit protection

Product Includes...

  • PCAN-MicroMod
  • PCAN-MicroMod motherboard in casing including mating connectors including crimp contacts
  • PCAN-MicroMod Configuration Software for Windows®
  • Manual in PDF format

CANopen® firmware is available for all PCAN-MicroMod motherboards.
 

Requirements

  • The configuration requires a PEAK CAN interface