PCAN-PC/104

Part No.: .
MPPK-IPEH-002055 (Dual Channel)
MPPK-IPEH-002056 (Single Channel opto-decoupled)
MPPK-IPEH-002057 (Dual Channel opto-decoupled)

The PCAN-PC/104 card enables the connection of one or two CAN networks to a PC/104 system.

*標高電子為德商PEAK SYSTEMS台灣唯一代理商。

產品介紹

!!! IPEH-002055 & IPEH-002056 - Out of Stock. !!!


Description

The PCAN-PC/104 card enables the connection of one or two CAN networks to a PC/104 system. Multiple PCAN-PC/104 cards can easily be operated using interrupt sharing.

The card is available as a single or dual-channel version. The opto-decoupled versions also guarantee galvanic isolation of up to 500 Volts between the PC and the CAN sides.

The package is also supplied with the CAN monitor PCAN-View for Windows® and the programming interface PCAN-Basic.


Specification

  • Form factor PC/104
  • Multiple PC/104 cards can be operated in parallel (interrupt sharing)
  • 14 port and 8 interrupt addresses are available for configuration using jumpers
  • 1 or 2 High-speed CAN channels (ISO 11898-2)
  • Bit rates from 5 kbit/s up to 1 Mbit/s
  • Compliant with CAN specifications
    2.0A (11-bit ID) and 2.0B (29-bit ID)
  • Connection to CAN bus through D-Sub slot bracket, 9-pin (in accordance with CiA® 303-1)
  • NXP SJA1000 CAN controller, 16 MHz clock frequency
  • NXP PCA82C251 CAN transceiver
  • 5-Volt supply to the CAN connection can be connected through a solder jumper,
    e.g. for external bus converter
  • Galvanic isolation on the CAN connection up to 500 V, separate for each CAN channel
    (only for IPEH-002056 and IPEH-002057)
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Pin Assignment D-Sub

 

PIN PIN Assigmnet
1 Not connected / optional +5V
2 CAN-L
3 GND
4 Not connected
5 Not connected
6 GND
7 CAN-H
8 Not connected
9 Not connected/ optional +5V

 

Product Includes...

  • PCAN-PC/104 card
  • Slot bracket with D-Sub connectors for the CAN bus
  • Device drivers for Windows® 10, 8.1, 7 and Linux (32/64-bit)
  • Device driver for Windows® CE 6.x (x86 and ARMv4 processor support)
  • CAN monitor PCAN-View for Windows®
  • CAN monitor PCAN-View for DOS
  • Programming interface PCAN-Basic for developing applications with CAN connection
  • Programming interfaces for standardized protocols from the automotive sector
  • Manual in PDF format
Note:
1.The product PCAN-PC/104 Single Channel (IPEH-002054) is no longer manufactured! Alternatively, the PCAN-PC/104 Single Channel opto-decoupled (IPEH-002056) can be used, since it behaves identically concerning the CAN functionality.

2. Prices and Specifications are subject to change without notice