VN5610A/ VN5640

Part No.: MPVT-VN5610A-VN5640
The VN5610A and VN5640 are compact and very powerful interfaces with USB host connection for accessing Ethernet and CAN (FD) networks.

產品介紹

VN5610A/VN5640 - Powerful and Multifunctional USB Network Interfaces for Automotive Ethernet and CAN FD

The VN5610A and VN5640 are compact and very powerful interfaces with USB host connection for accessing Ethernet and CAN (FD) networks.

There are many use cases for the VN5610A and VN5640 such as  Ethernet monitoring, frame- as well as load generation or synchronous tracing of Ethernet frames with other bus systems such as CAN.

Furthermore the VN5640 interface offers with its numerous Ethernet channels a powerful platform for extensive analysis, simulation or complex testing tasks within an Automotive Ethernet network.
 

Advantages

  • Two (VN5610A) independent Ethernet channels for the IEEE standards 100BASE-T1 (BroadR-Reach) as well as 10BASE-T/100BASE-TX/1000BASE-T

  • Twelve (VN5640) independent Ethernet channels for the IEEE standards 100BASE-T1 (thereof up to six channels 1000BASE-T1 in the Option  1000BASE-T1) and four additional channels

  • 10BASE-T/100BASE-TX/1000BASE-T

  • Two CAN highspeed channels (CAN FD capable)

  • Ethernet monitoring between two nodes

  • Additional IO interface for setting (e.g. the DoIP Activation Line) or sampling of digital values

  • Comprehensive analysis on a network with multiple nodes (VN5640)

  • Optimal support of Diagnostics over IP through additional DoIP Activation Line

  • Hardware filtering of Ethernet and CAN data already integrated on the interface

  • Integrated Layer 2 switch for optimized remaining bus simulation with several channels (VN5640)

  • Hardware load generators for low jitter and full bandwidth

  • Stand-alone mode capability ensures uninterrupted operation

  • Host connection via USB 2.0 and/or USB 3.0 (VN5640) as well as USB-bus-powered power supply (VN5610A)

  • Precise time stamps

  • Optimal performance when used with CANoe/CANalyzer.Ethernet

  • Synchronization between multiple devices and with other bus systems (CAN, LIN, FlexRay, MOST)

  • Fastest flashing with the Vector flash tool vFlash

  • Open interface for third-party tools with the XL Driver Library (CAN and Ethernet)

  • High flexibility by reconfigurable FPGA hardware architecture

  • Rugged housing, power supply and temperature range ideal for automotive or other industrial applications

  • With CANoe.AFDX or CANalyzer.AFDX access to the Ethernet-based AFDX® protocol that is widely used in the aerospace industry (VN5610A)

Gallery


VN5610A/VN5640 - Powerful and Multifunctional USB Network Interfaces for Automotive Ethernet and CAN

Application Areas

  • Remaining bus simulation:

Independent channels for Ethernet and CAN. On all channels, simultaneous operation of remaining bus simulation is possible with CANoe/CANalyzer.Ethernet.

  • Media converter:

Data link between 100BASE-T1 (BroadR-Reach) and 100BASE-TX/1000BASE-T physical layer. VN5640 Option 1000BASE-T1 with additional data link between 1000BASE-T1 and 1000BASE-T.

Benefit: Standard Ethernet logger and Ethernet accessories can be connected.
  • Direct access:

Individual access to each channel, for example, for reprogramming of ECUs for vehicle diagnostics or testing of several identical systems on a test bench.

  • Ethernet monitoring:

Transparent connection (in/out/monitor) between two nodes (e.g. Diagnostic over IP Monitoring) and monitoring with exact time stamps.

Ethernet Interface - Use Case Matrix


Application Area

Physical Layer 

Network Interfaces

 

VN5640

VN5610A

VN7640

VX0312

VN8900

ECU Communication

Measurement /  Simulation

Analysis,  simulations, or 
more complex  test tasks
within  an Ethernet  network.

Automotive Ethernet
(100BASE-T1)

x

x

-

-

-

Automotive Ethernet
(1000BASE-T1)

x

-

-

-

-

Standard Ethernet

x

x

-

-

-

DoIP

Access to ECUs via the DoIP
standard. An additional DoIP
Activation Line is available.

Standard Ethernet x x x x x(1)

Logger Extender

The interface can be connected
as an extension for loggers with
Ethernet support. The data
recorded by the interface will be
transferred to the logger.

Standard Ethernet x - - - -

Infrastructure

XCP

Fast and reliable connection to a
PC with measurement and
calibration software via XCP-on-
Ethernet.

BroadR-Reach x x x x x
Standard Ethernet x x x x x

Adapter

Windows network driver (NDIS) to
operate the Ethernet/BroadR Reach
interface as a regular network
adapter for tools without XL driver
support.

Standard Ethernet - - - x -

ETH Host

Alternative connection of the interface
to the test PC via Ethernet.

Standard Ethernet (2) (2) x - x

(1) = without Activation Line

(2) = available in a later release
 

Accessories


BRcable2Y:  Y cable for Vector Ethernet Interface VN5610A/VN5640 with D-SUB9 double assignment.

Different cable solutions for adapting 100BASE-T1/1000BASE-T1 networks and different cables for the power supply are available (AC adapter, vehicle power plug, banana plugs).