High Voltage Iso DAQ

Part No.: MP-IPET-High-Voltage-Iso-DAQ
4-channel DC high-voltage divider up to 1 kV measuring range

產品介紹

Features

  • Reliable voltage measurement on high-voltage DC systems
  • Electrically isolated high-voltage divider
  • Short-circuit current limitation via HV Current Limiter
  • Measurement data output to CAN
  • For electric and hybrid vehicle applications
  • Approved applications according to CAT I and CAT II
  • Use only together with HV Current Limiter

Technical Details

Device
Maximum Input Protection Voltage (Channel) ±1000 V (indefinitely)
Channel Sampling Rates 1/ 2/ 5/ 10/ 50/ 100/ 200/ 500/ 1000/ 2000 Hz
Oversampling 2 kHz
Aggregate Sample Rate 8 kHz
Voltage Supply 9 … 36 VDC
Supply Voltage Thresholds Switch-on 9 ±0.3 VDC / Switch-off 6 ±0.3 VDC
Power Consumption, Typical 7.5 W
Working Temperature Range -20 … 70 °C (-4 … 158 °F)
Storage Temperature Range -30 … 85 °C (-22 … 185 °F)
IP-Code IP 54 (ISO 20653 - 2013)
Relative Humidity 5 … 95 %
Dimensions W173 mm x H68 mm x D142 mm (6.8 in x 2.7 in x 5.6 in)
Weight 1370 g (3.02 lb)
Configuration Interface CAN high speed
Data Transfer Rate Software selectable up to 1 Mbit/s (ISO 11898-2)
Input Sockets 4 mm saftey banana plugs
Galvanic Isolation
Input ↔ Module Power Supply ±1000 VDC
Input ↔ CAN ±1000 VDC
Input ↔ Enclosure ±1000 VDC
Input ↔ Input ±1000 VDC
Test Voltage 3536 VAC @ 50 Hz (sine wave)
Application According to CAT I 1000 VDC
Application According to CAT II 600 VAC @ 50 … 60 Hz (sine wave)
General Channel Properties
A/D Converter 16 bit / SAR (successive approximation register)
Channel LED No
Channel Impedance 21 MΩ / 100 pF (with HV Current Limiter)
Hardware Filter (Switchable) 150 Hz, Butterworth (8-pole)
Channel Volt
Measurement Range SENS ± 1000 V
Accuracy at Ambient Temperature 25 °C ± 0.05 %
Accessories
System Cable  620-561.pdf
System Cable  620-502.pdf
System Cable  620-560.pdf
System Cable  620-567.pdf
System Cable  620-044.pdf
System Cable M-CAN-ABS.pdf