Software & Hardware
Software & Hardware
OBD-II Calibration / Diagnosis / Validation in Vehicle Communication
OBD-II ECU Simulator
OBDsim-680C: Ultra Professional OBD-II Simulator
Part No.: MP-OBDsim-680C
This is the OBD-II Simulator for reseach and development purposes.
Simulates vehicle ECU and generates all SAEJ1979 compliant protocol’s OBD-II diagnostic data:
More than 50 sets of OBD-II Live Data diagnostic parameters, including vehicle speed, engine RPM, cooler temperature, oxygen sensor voltage, throttle position sensor, etc.
All data can be displayed by the graphic interface using the software of OBDsim Master on PC.
Simulates vehicle ECU and generates all SAEJ2012 compliant protocol’s OBD-II DTC data:
More than 5000 sets of standard OBD-II DTC including vehicle body, chassis, power transform unit, network, …etc.
Stored and Pending DTC for each data can set individually.
All trouble codes can be displayed in graphics using OBDsim Master software on PC, with maximum 5 of Stored or Pending DTC.
Trouble code numbers can be displayed on the LCD indicator lights, which also has the MIL indicator function.
Simulates vehicle ECU, and performs Mode 01 to Mode 4 of SAEJ1979 protocol:
Mode 01: Current OBD-II Live Data acquisition
Mode 02: Freeze OBD-II data acquisition (each DTC can generate 1 freeze OBD-II data, it includes coolant temperature, intake air temperature, intake air pressure, timing advance, fuel system status, throttle position, calculated engine load value, engine RPM, vehicle speed, A/F value).
Mode 03: Obtain Stored or Pending DTC.
Mode 04: Clear DTC
Supports ISO 15765-4 (CAN 250/500kbps, 11/29 bit) OBDII protocol.
Standard OBD-II 16-pin female connector or SAE J1962 compliant.
Provides standard OBD-II data interpretation for SAE J1978.
More than 50 live data can be displayed, all data can also be set and playback.
OBD-II diagnostic data and TC can be updated using OBDsim Master software.
Generates SAE J2012 compliant OBD-II DTCs, more than 5000 DTCs can be simulated including stored DTCs, pending DTCs.
Freeze frame data can be generated when stored DTC s done.
The OBD live data and the PID of DTC as well as its definition is extendable by the Master software.
OBDsim-680C Ultra Professional OBD-II Simulator (with LCD indicator lights)
100-240V/12V/2A power adapter
D-Sub 9-pin cable (F to M)
OBDsim Master software and standard OBD-II interpretation software
1 year warranty under normal operation (no artificial damage)