CANopen - CAN Bus 之工業控制|eAutomind

wwwMicroport

 現在的位置: 首頁產品簡介

配件 (Accessories)

(未稅)台幣定價:0
產品價格標示為"0"表示未定價,
    索取報價請按聯絡我們
配件 (Accessories)
 

簡易規格下載

配件 (Accessories)

CAN, LIN, ISO11898-2/3, USB to CAN, PCI to CAN, PC104 to CAN, UART to CAN, PCI Express to CAN, LIN to CAN, ISA to CAN, J1587, K-Line, SWC, J1850, CAN Development Kit

Part No:MPAUTE-CAN-Diagnostic-Accessories

Product Overview
 

Products

Description

Palm III/VII HotSync Cable Palm III/VII HotSync Cable A Palm serial HotSync cable is used on the Dyno-Scan product to connect the Palm handheld to the OBD II adapter. 

Visit our Supported Palms for assistance with selecting a HotSync cable.

Palm V HotSync Cable Palm V HotSync Cable Palm serial HotSync cable is used on the Dyno-Scan product to connect the Palm handheld to the OBD II adapter. 

Visit our Supported Palms for assistance with selecting a HotSync cable.

Palm m100/m105 HotSync Cable
 
Palm m100/m105 HotSync Cable Palm serial HotSync cable is used on the Dyno-Scan product to connect the Palm handheld to the OBD II adapter. 

Visit our Supported Palms for assistance with selecting a HotSync cable.

Palm HotSync Cable Palm HotSync Cable

A Palm serial HotSync cable is used on the Dyno-Scan product to connect the Palm handheld to the OBD II adapter. 

Works on select palmOne and Palm handhelds (Palm, Inc. formerly palmOne, Inc.)

Visit our Supported Palms for assistance with selecting a HotSync cable.
Palm Treo HotSync Cable Palm Treo HotSync Cable

A Palm serial HotSync cable is used on the Dyno-Scan product to connect the Palm handheld to the OBD II adapter. 

Visit our Supported Palms for assistance with selecting a HotSync cable. 

Palm T|X/E2 Treo 650/700p Data Cable Palm T|X/E2 Treo 650/700p Data Cable

A Palm serial HotSync cable is used on the Dyno-Scan product to connect the Palm handheld to the OBD II adapter. 

This palmOne cable only works with the Dyno-Scan product. It will not HotSync with your PC.

Visit our Supported Palms for assistance with selecting a HotSync cable. 

Sony N/S HotSync Cable
 
Sony N/S HotSync Cable

A Palm serial HotSync cable is used on the Dyno-Scan product to connect the Palm handheld to the OBD II adapter. 

Visit our Supported Palms for assistance with selecting a HotSync cable. 

Sony HotSync Cable Sony HotSync Cable

A Palm serial HotSync cable is used on the Dyno-Scan product to connect the Palm handheld to the OBD II adapter. 

Visit our Supported Palms for assistance with selecting a HotSync cable. 

Handspring Visor Data Cable
 
Handspring Visor Data Cable

A Palm serial HotSync cable is used on the Dyno-Scan product to connect the Palm handheld to the OBD II adapter. 

This Handspring cable only works with the Dyno-Scan product. It will not HotSync with your PC.

Visit our Supported Palms for assistance with selecting a HotSync cable. 

USB Cable USB Cable

A USB cable connects a Windows PC to the USB OBD II adapter. 

The cable is 6ft long with male A-B connectors.

USB Cable A to Mini-B
 
USB Cable A to Mini-B

The USB Cable A to Mini-B cable connects a DashDyno SPD to your Windows PC^s USB port. 

IN STOCK, usually ships in 1 - 2 business days. Press the Order button below to purchase.

RS-232 Cable
 
RS-232 Cable

A RS-232 Cable connects a Windows PC to the OBD II adapter. 

The cable is a RS-232 null modem cable with female DB9 connectors on each end and is 3ft long.

DashDyno Serial GPS Cable DashDyno Serial GPS Cable

The DashDyno Serial GPS Cable is used to connect a external serial GPS receiver to a DashDyno SPD. 

GPS positional data is recorded by DashDyno and saved to the SD card for playback using the Dyno-Scan for Windows software. The external GPS receiver must support serial communication and the NMEA 1083 protocol. Most handheld GPS receivers from makers such as Garmin, Magellan and Lowrance will support these features. 

Mini-DIN Cable Mini-DIN Cable

The Mini-DIN cable is used to connect custom vehicle sensors of your choice to your DashDyno SPD auxiliary analog and digital inputs. 

Typically one cable end is cut and the wire ends are spliced into a custom vehicle wire harness that you design. See the Specifications tab below for the pinout wire color coding used inside the cable. See the DashDyno User Guide for the mini-DIN pin and DashDyno auxiliary port pinouts. 

OBD II Cable DB9 OBD II Cable DB9

The OBD II cable is used on the Dyno-Scan product to connect the OBD II adapter to the vehicle. 

NOTE: The OBD II cable is only designed to connect to the Auterra OBD II adapter. Do not connect this cable to a laptop or other any other serial port as damage may occur.

OBD II Cable Modular OBD II Cable Modular

The OBD II Modular cable is used to connect a DashDyno SPD to your vehicle. 

NOTE: The OBD II Modular cable is only designed to connect to the Auterra DashDyno SPD product. Do not connect this cable to a laptop or any Ethernet port.

Quick Release Windshield Mount
 
Quick Release Windshield Mount The Quick Release Windshield Mount is used to mount a DashDyno SPD in a vehicle. A suction cup to adhere to the inside of the vehicle windshield. The quick release feature mounts to the back of DashDyno making for quick removal from the vehicle.  
12V AC Adapter 12V AC Adapter The DashDyno 12V AC adapter powers the DashDyno from an AC outlet instead of the vehicle OBD II connector. 
USB to Serial Adapter USB to Serial Adapter

A USB to Serial Adapter for PCs or Notebooks without a serial port. System requirements:

  • Windows 98 SE, ME, 2000, XP, Linux (Does not support Mac)
  • Pentium 233MHZ or faster
  • 64 MB RAM or more
  • Available USB Port


 

 

配件 (Accessories)簡易規格下載
 

最新消息| 公司簡介| 產品簡介 | 線上報價 | 經銷夥伴 | 下載 | 搜尋商品 | 聯絡我們

© 2016 標高電子股份有限公司 著作權所有,並保留一切權利。