CANopen - CAN Bus 之工業控制|eAutomind


 現在的位置: 首頁產品簡介

SYNC 2100 Intelligent Remote Terminal Unit

SYNC 2100 Intelligent Remote Terminal Unit


SYNC 2100 Intelligent Remote Terminal Unit


Part No: MPKLK-IEC61850-Sync2100-Intelligent-Remote-Terminal-Unit

SYNC 2100 series of intelligent Remote Terminal Units from Kalkitech are ideal for low to medium count IO monitoring. With customizable DI, DO, AI card options, SYNC 2100 products are ideally suited for varying Distribution Automation and IO monitoring requirements including a Feeder RTU (FRTU) in Ring Main Units (RMUs), auto-reclosers and sectionalizers. The device also comes with real-time embedded Linux OS and supports a host of protocols like IEC 60870-101/104, Modbus as well as option to have IEC 61850, DNP3.0 and wireless communications like GPRS/ CDMA and 3G over secure VPN connection.


The SYNC 2100 Remote Terminal Units have a large set of protocols support including IEC 61850, DNP3.0, IEC 60870-101/104 and Modbus. With numerous hardware and software options like IEC61850-3 and IP65 variants to IEC 61131-3 support, SYNC 2100 offers the largest flexibility and makes it ideal for Distribution Automation as well as for Substation Monitoring.

Key Features:

  • General
    • Enabled with smartgrid protocols IEC 60870-101/104, DNP3.0, Modbus and IEC 61850
    • Upto 5000 data point support
    • Last 10000 event storage
    • Multi master communication capability
    • Inbuilt protocol conversion capabilities
    • Local/Remote communication over serial and ethernet port
    • Local/Remote operation
    • Automatic startup and initialization following power restoration
    • Time synchronization using IEC60870/DNP3/SNTP
    • Transparent/tunneling support for remote configuration and disturbance collection
    • Device management using SNMP/webserver
    • Time stamping resolution of 1 millisecond
    • Device and communication redundancy supported
  • Security
    • Communication security using IEC 62351
    • SSL based VPN with AES, DES or 3DES encryption over WAN/LAN
    • NERC-CIP security compliant
  • Reliability
    • IEC 61850-3 compliant hardware
    • Remote configuration and software update/FOTA
  • Scalability and upgradability
    • Inbuild and plug-in I/O support
    • Custom card based on the requirement *
    • Internal and external pluggable cellular modem (GPRS/EDGE/CDMA/UMTS)
    • External pluggable RF modem
    • Option for expanding communication port*

* Customized module

Model Variants:

SYNC 2100 has three variants:

  • SYNC 2101 with fixed IOs
  • SYNC 2111 with 5 I/O card option
  • SYNC 2121 with 8 I/O card option

SYNC 2101: Built-in card having maximum of 20 DIs, 6DOs and 4AIs. It is ideal for asset monitoring of Auto-reclosers, Sectionalizers and Capacitor Banks.

SYNC 2111/2121: These products comes with add-on IO card options, providing option to have upto 128 IO points, of varying combinations of DI, DO and AI. The variants are best suited for applications with Ring Main Unit (RMU), Distribution Transformers, and other assets having medium/ large IO requirements.


Below is the sample architecture of Sync 2100:


Management Kalkitech EasyConnect configuration Utility/ Web server/ SNMP & SSH Interface over Secure Network. FOTA support over GPRS/EDGE/CDMA
Maintenance Direct over Debug port or Console port
Application Protocol IEC 60870-5-101/104, DNP3 serial/TCP, Modbus RTU.TCP, DLMS, IEC 61850 and many more. Refer the full list of protocols at
LED Indications LAN Ready, Data Transfer, Serial Port RX/TX, Status, Power, IO Card Status
Security NERC/CIP Compliant, SSHv2 SSL based VPN tunnel using Blowfish / AES/ 3DES
Logic Programming Basic Logic Engine with AND/OR/NOT/Bit SHIFT/Split/Index support for digital and analog data Delay operations, Advanced logic based on IEC61131-3
Certifications IEC61850-3, CE
Ports DB9-1 RS232, 1 RS232/485 Combicon-1 RS485 DB9-1 RS232, 1 RS232/485 Combicon-2 RS485 DB9-1 RS232, 1 RS232/485 Combicon-2 RS485
Data Rate 110bps-115.2kbps
Ports 1 RJ45
Physical Layer 10/100 Base-T auto sensing
Isolation 1500VAC min as per IEEE802.3/ANSI X3.263
I/O Interface
Default Options 8DI 24/48VDC, 6DO 2.5-5A Expandable up to 5IO card Expandable upto 8 IO card
Expansion Cards 1. 4AI card, 4-20mA 1No. 2.12 DI card, 24/48 VDC 1No. 1. 16DI card, 24VDC 2. 16DO card, 500mA@24VDC 3.8AI card, 0-10VDC, 0-5VDC 4.20mA, 0-20mA 1. 16DI card, 24VDC 2. 16DO card, 500mA@24VDC 3.8AI card, 0-10VDC, 0-5VDC 4.20mA, 0-20mA
Digital Input Isolation 3KV optical
Digital Output Isolation 3KV optical
Power Requirements
Power Supply 19-58 VDC
85-264 VAC 50-60Hz
170-370 VDC
Consumption Details
Main Card 5 Watt
Internal Modem 8 Watt Peak
16 DI Card 1 Watt
16 DO Card 1 Watt
8AI Card 1 Watt
8DI, 6DO 2 Watt
8DI, 6DO, 4AI 2 Watt
12 DI 1 Watt
Plug-in Modem
Internal GPRS/ EDGE/ CDMA upgradable to 3G, Internal Low power radio*
External Radio modem, PSTN modem
Dimensions (H X W X D)
Weight 800 grams 1600grams 1900 grams
IP as per IEC60529 IP20
Operating Temperature -10 to 70 °C
Storage Temperature -20 to 80 °C
Relative Humidlity 5%-95% RH non condensing

* Available on special request

SYNC 2100 Intelligent Remote Terminal Unit簡易規格下載

最新消息| 公司簡介| 產品簡介 | 線上報價 | 經銷夥伴 | 下載 | 搜尋商品 | 聯絡我們

© 2016 標高電子股份有限公司 著作權所有,並保留一切權利。