CANopen - CAN Bus 之工業控制|eAutomind

wwwMicroport

 現在的位置: 首頁產品簡介

PCAN-AU5790

(未稅)台幣定價:0
產品價格標示為"0"表示未定價,
    索取報價請按聯絡我們
PCAN-AU5790
 

簡易規格下載

PCAN-AU5790

Part No: MPPK-CAN-Bus-PCAN-AU5790

Bus converter High-speed CAN to Single-wire CAN

The PCAN-AU5790 bus converter establishes a connection between a high-speed CAN bus (ISO 11898-2) and a single-wire CAN bus (SAE J2411). One of the most important potential applications of the bus converter is a simple connection between a PCAN series CAN interface (e.g. PCAN-USB) and a single-wire CAN bus.

Specifications

  • There are three different operating modes for the SW-CAN side which can be set using a sliding switch. Normal (33.3 kbit/s), High-speed
  • (83.3 kbit/s) and Wake-up
  • Indicator LEDs for power supply (red) and wake-up signals (yellow)
  • Power supply (5 V, 150 mA) through HS-CAN connection (a current list of PEAK CAN interfaces with suitable supply voltage is available upon request)
  • If the power supply has a lower current output than 150 mA, an additional 12-Volt supply is needed via the SW-CAN connector
  • Operating temperature range from 0 to 70 °C (32 to 158 °F)
Pin assignment Female D-Sub Connector Pin Pin assignment high-speed CAN (82C251)
1 5 V Power supply
2 CAN-L
3 GND
4 Not connected
5 Not connected
6 GND
7 CAN-H
8 Not connected
9 Not connected / optional +5V
Pin assignment Male D-Sub Connector Pin Pin assignment single-wire CAN (AU5790)
1 Not connected
2 Not connected
3 GND
4 Not connected
5 CAN
6 GND
7 Not connected
8 Not connected
9 VBAT

Scope of supply

  • Adapter in plastic casing
  • Manual in PDF format

Downloads

Problems while downloading the files? Use the right mouse button and save as ...

PCAN-AU5790 manual in PDF format (English)

MPPK-CAN-Bus-PCAN-AU5790(002040)

PCAN-AU5790簡易規格下載
 

最新消息| 公司簡介| 產品簡介 | 線上報價 | 經銷夥伴 | 下載 | 搜尋商品 | 聯絡我們

© 2016 標高電子股份有限公司 著作權所有,並保留一切權利。