Ethernet TCP-UDP to RS232-422-485 Industrial DIN-Rail-DR2
Need to convert your serial (RS232, RS422
or RS485) device(s) to 10/100 Ethernet? The DR2 product does the
job with no changes to your software.
The DR2 is an industrial device
server packaged in a DIN-rail mountable plastic housing. The
DR2 takes your serial data stream and converts it to Ethernet
packets with no changes to your software. A Web Server is
also built-in, which allows you to design your own pages and
interface with your product from the Internet.
Flexible configuration options allow the
DR2 to be set up locally using the serial port, or remotely over
Ethernet using Telnet or a common web browser.
Cross Reference Lantronix Xpress-DR:
The DR2 works out of the box and comes with COM Port
Redirector which allows you to redirect a PC serial port to
Baud rates up to 115Kbps,
Bits, 1/2 Stop Bits, XON/XOFF,
Isolation: 2000Vrms serial Isolation, 1500Vrms Ethernet Isolation,
Connectors: Serial - Screw Terminals or RJ45, Network - RJ45,
Input - 9 to 30VDC or 9-24VAC, 3W maximum operation, Connector- Screw
Terminals for power and ground,
Extended Temperature Range: 0C to +70C,
90 x 60 x 36 mm (inches: 3.54 H x 2.4 D x 1.4 W),
CSA,TUV, FCC, CE, FM Class I, Div. 2.